星点设计-响应面法优选苦参总生物碱水提醇沉工艺 |
投稿时间:2018-11-07 点此下载全文
|
引用本文:覃辉.星点设计-响应面法优选苦参总生物碱水提醇沉工艺[J].中国现代中药,2019,21(8):1084-1088 |
DOI: |
摘要点击次数: 871 |
全文下载次数: 219 |
|
|
中文摘要:目的:优化苦参水提醇沉提取工艺,获取苦参总生物碱最佳的工业化提取工艺条件及技术参数。方法:采用Box-Benhnken中心组合设计,以苦参总生物碱提取率和浸膏得率的总权重为评价指标,对液料比、提取时间和醇沉浓度3个影响因素进行考察,以Design-Expert 8.05软件对实验数据作统计处理,优选确定最佳提取条件。结果:优化得到最佳工艺条件为加苦参饮片9倍量的水,回流提取2次,3 h/次,醇沉浓度为70%,此工艺条件下苦参中总生物碱的提取率可达1.62%,干膏得率为22.51%。结论:优选得到的工艺稳定、可行,可作为苦参工业化提取提供参考。 |
中文关键词:苦参 提取工艺 星点设计-响应面法 |
|
Optimazation of water Extraction and Alcohol Precipitation Total Alkaloid in Sophora flavescens by Star Point Design-response Surface Method |
|
|
Abstract:Objective:To optimize the extraction process of Sophora flavescens water extraction and alcohol precipitation,and obtain the best industrial extraction conditions and technical parameters of total alkaloids in S.flavescens.Methods:Box-Benhnken center combination design was used to evaluate the total weight of the total alkaloid extraction rate and the extraction yield.The factors including the liquid-to-liquid ratio,extraction time and alcohol concentration were investigated.The Design-Expert 8.05 software was applied to process the experimental data,and obtain the optimal extraction conditions.Results:The optimal process conditions were 9 times of water,decoction for 2 times,3 hours/time,and the concentration of alcohol was 70%.At this condition,the extraction rate of total alkaloids in S.flavescens could arrived 1.62%,the dry paste yield was 22.51%.Conclusion:the preferred process is stable and feasible,and can be used for industrial extraction of S.flavescens. |
keywords:Sophora flavescens extraction technology central composite design-response surface method |
查看全文
查看/发表评论 下载PDF阅读器 |